MAPM
Monophasic Action Potential Module type 703
The MAP module Type 703 is used for capturing and amplifying
monophasic action potentials (MAPs). It has to be connected to special MAP
electrodes. This module incorporates isolated input amplifiers in order
to avoid hum interference. In this way the inputs are isolated electrically
from the output circuits and from the housing.
The output voltages of the amplified MAP signals can be switched with jumpers
to the PLUGSYS system bus. From the system bus they can be picked off by
a ROM module (Recorder Output Module, e.g. ROM-DL) for direct recording
or for data acquisition by computer.
A square-wave calibration generator with a 10 mV amplitude is incorporated
for calibrating the amplitudes.
Inputs: A special connection box is recommended for connecting the
MAP electrodes, with separate switch-off facility for the individual channels.
The connection box has to be placed close to the electrodes so that the
unscreened electrode leads can be kept as short as possible. The box is
not part of the module and has to be ordered separately.
