Back

Storage Oscilloscopes

100 MHz Digital Storage Oscilloscope HM1007

Analog-Digital Oscilloscope HM 1007

Analog: 2 channels 0-100MHz, time base max. 5ns/div.

Digital Max. sampling rate 2x40MS/s, storage 4x2048x8 bit

HITACHI EASE-TO-USE SCOPES

VC-6545

40MS/s(1ch)
20MS/s(2ch simultaneously)
100MHz, 4kw(1ch), 2kw/ch

VC-6525

20MS/s(2ch simultaneously)
50MHz, 2kw/ch

VC-6524

20MS/s, 50MHz, 2kw/ch

VC-6523

20MS/s, 20MHz, 2kw/ch 

  • Usable both real-time oscilloscope and digital storage oscilloscope.
  • Exclusive one-shot and intermittent phenomena are simple to capture using the digital storage function.
  • Using the pretrigger function, it is possible to observe the rising edge of a waveform which occurs before the trigger occurs.
  • Even non-repeating events can be observed as clean waveform using the digital storage function.
  • Low-speed phenomena can be observed as a trace using the digital storage function (roll mode).
  • By connecting external plotter, it is easy to produce hardcopies of CRT waveform data.
  • Averaging can be used to reduce noise, thereby creating a display of just the signal of interest.
  • Captured waveform can be saved internal memory and recalled for comparison.
  • The RS-232C interface can be used to transfer stored waveform data to an external computer.
  • A readout functions provides CRT display of setting values.
  • Two cursors can be used to make accurate measurements of voltage, time, and frequency.
  • After a waveform is stored, it can be displayed in expanded form with interpolation (linear or sine).
  • Using sweep time autoranging, the sweep rate setting automatically optimized in accordance with the input signal frequency (VC-6545/6525).
  • Trigger lock hold the sum of the holdoff time and sweep time for stable trigger of complex pulse trains (VC-6545/6525).
  • The frequency of the channel selected as the trigger signal is automatically counted.  
Specifications 

Hitachi Digital Storage Oscilloscope

V-1585

DC to 100 MHz 4 Channels

V-1565

DC to 100 MHz 2 Channels

V-1560

DC to 100 MHz 2 Channels

V-695

DC to 60 MHz 2 Channels

V-555

DC to 50 MHz 2 Channels

V-552

DC to 50 MHz 2 Channels

V-252

DC to 20 MHz 2 Channels

  • Direct readings of measured values are extremely simple and accurate (V-1585/1565/695/555).
  • Sweep time autoranging automatically optimizes the sweep time (V-1585/1565/1560/695).
  • Auto-trigger level automatically optimizes the trigger level variable range (V-1585/1565/1560/695).
  • Lightweight portable design with large 6 inch CRT.
  • Tested in ISO9002 factory.
  • Low failure rate, achieved by active application of past failure feedback data.
  • Provides high performance with delayed sweep
    (V-1585/1565/1560/695), TV sync trigger, frequency counter (V-1585/1565/695), cursor readout (V-1585/1565/695/555), trigger lock (V-1585/1565/1560/695), auto trigger level (V-1585/1565/1560/695), DC offset (V-555/552), and alternate magnification (V-555/552).

Specification V-1585 

Specification V-1565/1560/695

Specification V-555/552/252


HUGO SACHS ELEKTRONIK-HARVARD APPARATUS GmbH
Gruenstrasse 1 · D-79232 March-Hugstetten · GERMANY
Phone: +49 (0) 76 65 - 92 00-0 · Fax: +49 (0) 76 65 - 92 00-90