Capnograph for Small Rodents (Type 340)
The Type 340 capnograph for rats and mice is equipped with a built-in highly sensitive infrared spectroscopy CO2 sensor. The sensor is pressure and temperature compensated. The very low volume of the sensor, the optimized system volume and the application of a micro-pump allow very accurate monitoring of respiratory CO2 concentration on small animals. The Capnograph also includes electronic compensation for interference introduced to signals during NO2 anesthesia administration.
The Type 340 capnograph for rats and mice is equipped with a built-in highly sensitive infrared spectroscopy CO2 sensor. The sensor is pressure and temperature compensated. The very low volume of the sensor, the optimized system volume and the application of a micro-pump allow very accurate monitoring of respiratory CO2 concentration on small animals. The Capnograph also includes electronic compensation for interference introduced to signals during NO2 anesthesia administration.
A CO2 inlet tube (73-4553) and low volume filter (73-4554) are included and do not need to be ordered separately. Available as replacement parts.
Features
- Built-in highly sensitive temperature and pressure compensated infraredspectroscopy CO2 sensor
- Very low system compliance
- Basic evaluated parameters:
- CO2
- Respiration rate
- Extend function with optional flow heads to create a complete respiratory survey and monitoring system:
- Peak Inspiratory Flow
- Peak Expiratory Flow
- Peak Inspiratory Pressure
- Positive End-Expiratory Pressure
- Tidal Volume
- Respiratory Rate
- Analog output of CO2 waveform and end tidal CO2 for data collection on all versions
- Analog output of CO2 waveform, end-tidal CO2, respiratory flow, tracheal pressure, respiratory rate and tidal volume in extended version
Applications
The main function of this unit is capnography. With the extension using additional sensors, it can become a complete respiratory survey and monitoring system for:
- Capnography
- Anesthesia survey
- Respiratory monitoring
Extended Functions (optional)
The Capnograph can be equipped with two additional sensors, a pressure sensor for measuring tracheal pressure and a pneumotach with differential pressure transducer for measuring respiratory airflow. These sensors are mounted directly on the tracheal or intubation cannula and connected to the control unit, this serves to minimize the dead space. The tracheal pressure and the respiratory flow are important signals to monitor during mechanical ventilation. When monitoring these parameters the investigator can verify that ventilation is performed within normal physiologic limits and helps to avoid barotraumatic ventilation conditions.
Settings
All the settings are done using the display and keypad on the front panel. The settings can also be downloaded by software via a RS232 (optionally USB) port on the back panel.
Output
The following signals are available as analog signals on the rear of the unit:
- CO2 Waveform
- End expiratory CO2 (EtCO2)
Tracheal Pressure Range | –10 to +80 cmH2O | ||
CO2 Range | 0 – 10% | ||
Airflow Range Mouse | ±3.00 ml/sec | ||
Airflow Range Rat | ±30.00 ml/sec | ||
Tidal Volume Range Mouse | 1.0 ml | ||
Tidal Volume Range Rat | 5.0 ml | ||
Respiratory Rate Range | 0 to 300 BPM | ||
Output Signal Range | ±4 Volt | ||
Sampling Rate Mouse | ~10 ml/min | Sampling Rate Rat | ~15 ml/min |
Base Plate Dimensions (H x W x L) | 5.1 x 5.1 x 5.1 in (13 x 13 x 13 cm) | ||
Base Plate Weight | 15 ml/min |