Fiber (Membrane) Oxygenators & Holders
The fiber (or membrane) oxygenator is an alternative to glass frit or bulb oxygenators. This oxygenator is used for blood, blood/perfusate mix, or perfusate that contains protein (to prevent foaming).
Oxygenator holders are available separately. Mounting rods are not included. Mounting kits are specific for either the D150 or DP07HE
oxygenator. They include two ring clamps to hold the oxygenator, tubing adapters, and silicone and Tygon® tubing.
Features
- Hollow fiber oxygenator in two sizes D150 or DP07HE
- MediSulfone® membrane material
- 18/49 ml total priming volume
- 0.22/0.7 m2 active oxygenating surface area
- Can be used 3 to 10 times
- Available in individual units or in packages of five
- Selection of different holders available
D150 | DP07HE | |
Effective Surface Area | 0.25 m2 (2,500 cm2) | 0.7 m2 (7,000 cm2) |
Internal Diameter | 250 µm | 200 µm |
Outer Diameter | 28 mm | 43 mm |
Wall Thickness | 50 µm | 30 µm |
Effective Fiber Length | 140 mm | 140 mm |
Number of Fibers | 2,500 | 9,300 |
Fiber Material | MediSulfone Polysulfone, 50,000 Da | High Flux PUREMA |
Ultrafiltration Rate | 5.5 ml/h/mmHg | 32 ml/h/mmHg |
Maximum Pressure | 500 mmHg | 600 mmHg transmembrane pressure |
Sterilization | ETO sterlized | ETO sterilized |
Priming Volume | 19 ml | 49 ml |
Weight | 63 g | 140 g |
Housing Material | Polycarbonate | Polycarbonate |
Full Length | 180 mm | 180 mm |