Used for holding rods at right angles to each other. Accepts rods up to 13 mm (1/2 in) in diameter. Locking screws, when assembled, are turned in flush so there are no protrusions to snag tubing and apparatus.
The Stronghold Lattice Clamp has two open sides for holding rods at right angles to each other and accepts rods up to 13 mm (1/2 in) in diameter. The locking screws, when assembled, are turned in flush so there are no protrusions to snag tubing and apparatus. The locking screws are M5 (5 mm) thread Allen set screws 13 mm (1/2 in) long.
- Precision injection molded nylon with 30% glass fiber reinforcement provides enormous strength at a great saving in weight.
- There is absolutely no corrosion possible.
- High melting point of 221°C
- Good resistance to chemicals, salt solutions and most solvents.
About Harvard Apparatus Stronghold Products
This innovative, flexible, and totally integrated group of clamps, connectors and lattices meets many laboratory requirements. The nylon and glass fiber injection molding process creates an extremely strong corrosion free line of products. The high melting point of 221°C and chemical resistance makes these products the perfect material for lab settings.
Select suffix –R for a red body with white thumb screws and –W for a white body with red thumb screws.
|Accepts Mounting Rod Diameter||0 to 13 mm (0 to 0.5 in)||0 to 13 mm (0 to 0.5 in)|
|Clamping Range||0 to 13 mm (0 to 0.5 in)||0 to 13 mm (0 to 0.5 in)|
|Screw Thread M5||5 mm (0.2 in)||5 mm (0.2 in)|
|Screw Length||13 mm (0.5 in)||13 mm (0.5 in)|