PLUGSYS External Input Module (EIM)
SKU
GRP-EIM
For linking external equipment to the PLUGSYS system for connection to HA-HSE data acquisition hardware
The External Input Module (EIM) is used for feeding external analog signals into the PLUGSYS Measuring System, such as a flow signal from an external blood flowmeter, a force signal from an external bridge amplifier or distance signals measured using a sonomicrometer.
The EIM module (73-0222) consists of the two parts: EIM-A (Adjust) and EIM-B (BNC). The modules EIM-A and EIM-B normally fit in the PLUGSYS Mainframe from the front. With an optional board it is possible to install the module EIM-B on the rear to have more space on the front.
| Specifications | 73-0222 |
|---|---|
| Accessories | 2 BNC-BNC input cable, operating instructions |
| Connector | DIN 41612, 96-pin VG |
| Dimensions (H x W x D) English | EIM-A 5.1 x 1.6 x 8.7 in
EIM-B 5.1 x 1.6 x 2 in Suppression 5.1 x 1.6 x 4 in |
| Dimensions (H x W x D) Metric | EIM-A 128.7 x 20.2 x 220 mm
EIM-B 128.7 x 20.2 x 50 mm Suppression 128.7 x 20.2 x 100 mm |
| Gain | From 0.25 to 100 adjustable by 10-turn trimmer together with range switch x0.5/x1/x2, corresponding to max. input voltage range of ±0.1 to ± 10 V |
| Input | 4 analog inputs through BNC sockets on module EIM-B |
| Output | Through links on circuit board (jumpers) signal outputs are fed directly into bus distribution board of PLUGSYS measuring system |
| PLUGSYS Width* | 3 slot units |
| Power Supply | 5 V, 300 mA from PLUGSYS measuring system |
| Weight | 0.6 lb (0.25 kg) |