Small Surface Thermistor Probes
Ideal for cuvette, water bath, skin surface and other flat surface temperature measurements.
Maximum temperature 150°C (302°F).
Time constant 0.3 seconds.
Many other thermistor probes are available.
Ideal for cuvette, water bath, skin surface and other flat surfacetemperature measurements. The 4.8 mm (3⁄16 in) diameter sensor disk has a stainless steel patient side and epoxy back. The 2.4 mm(3⁄32 in) thick disk is attached to a 61 cm (24 in) PTFE covered wire. Maximum temperature 150°C. Probe disk is isolated, connector isnot isolated. Supplied with detachable lead. Time constant 0.3 sec. Supplied individually.
The adhesive patches are for holding skin surface temperature probes securely against skin for good thermal conductivity. Minimizes distortion of probe readings. Hypo-allergenic medical grade adhesive.
Item# | 59-9814 |
Interchangeability Tolerance |
±0.1oC over biological range from 32o to 42oC |
Sensor Disk Diameter | 4.8 mm (0.19 in) |
Sensor Disk Material | Stainless Steel and Epoxy sides |
Sensor Disk Thickness | 2.4 mm (0.09 in) |
Lead Length | 3.1 m (10 ft) |
Maximum Temperature |
150oC (302oF) |
Minimum Temperature |
-40oC (-40oF) |
Probe Wire Isolation |
Isolated |
Shaft Length |
61 mm (2.4 in) |
Shaft Diameter | 1.6 mm (0.0625 in) |
Time Constant |
0.3 seconds |